Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Newport
If you live in Newport and you’ve never had the chimney looked at, you’re not alone. Plenty of houses on this island have gone decades without anyone putting a camera up the flue. That’s the work we do: a real look inside the stack, a clean sweep, and a straight answer about what we find. We’re a chimney specialist, not a generalist with a brush, and we work the same streets from the Point to Historic Hill week after week. When you call, the phone gets answered. Call (833) 315-2861 to book a sweep or a chimney sweep inspection.
Why Newport Homeowners Call Providence Chimney Cleaning for Chimney Sweep
Our technicians have up to 12 years of experience, and a lot of that has been spent reading older flues rather than just scrubbing them. In Newport, that matters more than anywhere else we work. A brush will fit any chimney. Knowing what you’re looking at inside a pre-1900 brick stack takes someone who has seen hundreds of them.
We’re licensed and insured, and we work with contractor-grade materials from brands professionals trust, including HeatShield and DuraFlex for liner and flue repair. When a sweep turns into a discovery of cracked mortar or a missing liner, you get one company handling the inspection, the cleaning and any repair, so you’re not chasing three contractors to coordinate a single chimney.
Response into Newport is quick, and we’ll give you a clear window when you book. Expect us to treat inspection as a real service, not a sales funnel. Nothing gets recommended that you can’t see for yourself on the camera screen first.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Services in Newport
Chimney Services in Newport start with understanding what the house was built with. Most of the housing stock here predates electricity, and a lot of these stacks were built for coal or wood, not for the gas insert sitting in the firebox now. A sweep is a full mechanical cleaning of the firebox, smoke chamber and flue, paired with a Level 1 or Level 2 inspection depending on what you’re dealing with. A typical annual sweep in Newport runs $150 to $280, and a sweep paired with a Level 2 camera inspection runs $225 to $400. The written estimate sets the final price, and it’s free.
Annual Sweep and Creosote Removal
Yearly sweeping keeps soot and creosote from building into something a brush can’t safely handle. In homes that see steady winter burning, creosote accumulates faster than most people expect. If we find glazing that’s hardened onto the flue walls, we remove it properly rather than brush over it and call it clean.

Soot and Fireplace Cleaning
Soot settles everywhere inside a firebox and smoke chamber, and an unused fireplace in an old Newport home can hold years of it. We clean the whole venting path, not just the visible firebox, so the next fire doesn’t push leftover debris back into the room.

Chimney Sweep Certified in Newport
Chimney Sweep Certified means the person up the ladder or on the roof has been trained to inspect to recognized standards and knows the difference between a code-compliance issue and routine dirt. That distinction is the whole game in Newport, where original unlined flues and undersized clay tiles are the default rather than the exception. A certified inspection here includes the Level 1 and Level 2 work that tells you what the flue actually needs. A Level 1 inspection runs $100 to $175, and a Level 2 with camera runs $200 to $350, booked as its own service when you want an honest read without a sweep attached.
Reading the Flue With a Camera
We run a camera down the flue and show you the screen while we narrate what we see: corroded parging, cracked mortar joints, and any third-degree creosote glazed onto the smoke chamber. You’re looking at the same evidence we are, so the recommendation that follows is something you can verify.
Telling Real Problems From Routine Findings
Not every finding is urgent. Parging that has thinned but still holds is different from a flue with no liner at all serving a modern gas insert. We tell you plainly which problems are code issues, which can safely wait, and which need attention before the next fire.
Trusted Brands We Service in Newport
The materials that go into a Newport chimney repair have to be able to take coastal weather and decades of use. We specify Olympia Chimney components, Famco caps and venting, and DuraFlex flexible liner systems for relining, all contractor-grade products rather than hardware-store substitutes. We don’t claim to stock these locally or keep parts on hand. What we do is source the right product for your flue, order it for the job, and fit it properly, so you’re not sitting on a half-finished repair waiting for a generic part to arrive. We specify the right product for your flue, not whatever’s on the shelf. That keeps turnaround reasonable without cutting corners on what actually goes into the stack.
Common Chimney Sweep Problems We See in Newport Homes
- Unlined or undersized flues serving gas inserts. Many original brick stacks in the Point and Historic Hill were built for coal or wood, and a modern gas insert dropped in has no correctly sized liner to vent into. This is a code-compliance problem, not just a cleaning job.
- Parging and mortar eaten by salt air. Salt-laden coastal air and nor’easters wear away mortar joints and spall the exterior chimney crown, so brushing can dislodge loose material and hide deeper damage until the camera goes in.
- Third-degree creosote glazed onto the smoke chamber. Decades of coal- and wood-era use can leave hardened creosote that no brush will remove. It gets misdiagnosed as removable soot when it’s really a job for proper removal and often relining.
- Spalled chimney crowns and failing flashing. Weather cycling on this coast cracks exterior masonry, and a crown that looks fine from the ground can be letting water straight into the stack. That’s why a fix list here often pairs a sweep with crown and flashing repair.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Newport, RI
What you pay depends on the condition of the flue, not just square footage. A standard annual sweep in Newport typically runs $150 to $280. A sweep with a Level 2 camera inspection runs $225 to $400, and a standalone Level 2 inspection runs $200 to $350. Creosote removal where glazing has built up starts higher, usually $250 to $500 or more depending on the extent. If the inspection turns up a liner or crown problem, we quote that separately from the written estimate so nothing gets bundled into a number you didn’t approve. The estimate is free, and you’ll know the price before any work starts. If you want an exact figure, call (833) 315-2861 and we’ll walk through what your chimney likely needs.
We Also Serve Cities Near Newport
Newport sits on Aquidneck Island, but we also take sweep and inspection work in Newport, and out toward Newport East, Kingston, Tiverton and Warwick. If you’re just over a bridge or up the bay and want a second opinion on a flue, give us a call and we’ll get you booked into the schedule. Same standards, same camera, same written estimate wherever we go.
Serving Newport, RI – Our Local Coverage Area
We serve Newport and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Newport
Not safely, no. An unlined flue serving a modern appliance is a code-compliance problem, not a cleaning job, so a sweep alone doesn’t fix it. We inspect first with a camera, show you the unlined stack, and explain what a proper liner would cost before anything gets brushed or recommended.
Usually because the insert was dropped into a stack built for coal or wood, leaving the flue unlined or sized wrong for the appliance. Combustion byproducts then have nowhere correct to go and the insert struggles to draft. A Level 2 inspection will confirm the flue size and show you exactly why it’s underperforming.
You look. We run the camera and show you whether the creosote is light, fluffy soot that brushes away, or third-degree glaze hardened onto the smoke chamber walls that no brush will touch. You see the same screen we do, so the answer is something you can check rather than take on faith.
Yes, and it shows up as worn mortar joints, spalled crowns and crumbling parging on the outside of the stack. If your chimney has been through a few nor’easters, a sweep often reveals that the exterior needs repair alongside the cleaning, which we’ll quote separately with the camera evidence in front of you.
Once a year regardless of how much you burn. A chimney is a venting system first, a fireplace second, and unused flues in humid coastal summers can grow mold or break down creosote without a fire in them. Call (833) 315-2861 and we’ll schedule an inspection; the estimate is free.
Book Your Newport Chimney Sweep
If your Newport home has an older stack that hasn’t been looked at in years, the smartest first step is a camera inspection and a clean sweep. You’ll get a written estimate with the evidence in front of you, and a plain answer about what can wait and what can’t. Call (833) 315-2861 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Providence Chimney Cleaning.