Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Newport, RI
If you’re booking chimney work in Newport, RI, the inspection comes first for a simple reason: most chimneys in this city were built before anyone was lining flues, and you can’t tell a sound flue from a compromised one without looking inside it. Newport’s 18th- and 19th-century Colonials, Federals, and Victorians sit in salt air that eats mortar joints and parges, so the question is rarely whether the chimney needs attention – it’s what kind. We handle the inspection, the sweep, and the repair, and we tell you plainly when the work can wait. Call (833) 315-2861 to book.
Why Newport Homes Are Different
Newport’s housing stock forces a different kind of chimney work than you’d find inland. A large share of the city’s homes went up before 1900, and many still carry original brick chimneys with flues that were parged rather than fitted with a liner. Salt-laden air off the harbor attacks the mortar joints and crown from the outside while humid summers work on creosote and moisture inside unused flues. Nor’easters accelerate the spalling on exterior crowns, and a crown that’s already cracking lets water straight into the brick below.
In the Point and Historic Hill, the mismatch gets more specific. Chimneys built for coal or wood get retrofitted with modern gas inserts, and nobody sizes a liner to the new appliance. The result is a flue that vents an appliance it was never built for – a code-compliance problem, not a cleaning problem. Add dense clusters of multi-fireplace cottages in those neighborhoods and you get chimneys that need assessment flue by flue, not a single pass with a brush.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Newport Services
Two services account for most of the calls we take from Newport homeowners, and each has its own dedicated page covering the full scope of what the work involves.
Chimney Sweep in Newport
Sweeping in Newport is often as much a discovery job as a cleaning one. When we work a flue in an original 19th-century chimney, the brush tells us less than the camera does – cracked mortar, missing parging, and failed joints show up where a simple brushing would have passed right over them. We use professional-grade sweeping equipment and finish with a camera look so you know what condition the flue is actually in. For the full breakdown of what a chimney sweep involves here, see our Newport page.

Chimney Repair in Newport
Repair around salt air means addressing the masonry from the outside as well as the flue from the inside. Crowns crack, mortar joints erode, and spalling brick opens the chimney to water that then damages the liner. We use HeatShield resurfacing for compromised flues and DuraFlex flexible liners for relining, both contractor-grade systems rather than shelf patches. Details on structural work are on our chimney repair page for Newport.

Chimney Inspection in Newport

Chimney Inspection is where every Newport job starts, and it’s the service this city needs most. With so many pre-1900 Colonials, Federals, and Victorians carrying original brick flues that were never properly lined, an inspection is often the first time anyone has looked at the inside of the chimney with a camera. Salt air and humid summers make it worse: parging crumbles, mortar joints open, and a chimney serving a gas insert may have no correctly sized liner at all. You need evidence you can see, not a sales pitch.
Fireplace Inspection
Signs you need it
You’re buying a Newport home with an original fireplace, you’ve never had the firebox and damper looked at, or smoke backs into the room when you light a fire.
What it costs in Newport
A fireplace inspection typically runs $125 to $275 here, depending on how many fireplaces the house has and how much of the flue we can reach.
How we do it
We examine the firebox brickwork, damper, smoke chamber, and the first section of flue with a camera, then note every defect with photos you keep.
Chimney Flue Inspection
Signs you need it
Your chimney was built for coal or wood and now vents a gas insert, or the flue was never lined and the parging has started to fail.
What it costs in Newport
Flue inspection generally falls between $150 and $350, with the higher end reflecting camera work and a written photo report on a complex flue.
How we do it
We run a camera the full length of the flue, measure the liner against the appliance it serves, and document cracks, gaps, and every section of missing parging.
What Chimney Inspection Costs in Newport
| Item | Typical range in Newport |
|---|---|
| Fireplace inspection | $125 – $275 |
| Chimney flue inspection | $150 – $350 |
| Level 2 chimney inspection | $200 – $450 |
Does a Newport chimney built for coal need a new liner for a gas insert?
Often yes. A flue sized for coal or wood rarely matches a modern gas insert, and an unlined original chimney is a code-compliance issue. An inspection tells you whether relining is required or whether you can safely keep using it.
How often should a Newport chimney be inspected?
Once a year is the standard, and it matters more here because salt air and humid summers break down parging faster than inland. Call (833) 315-2861 for an exact quote – estimates are free.
Brands We Service in Newport
We work with professional-grade chimney product lines including Copperfield, DuraFlex, HeatShield, and Gelco, and we source components to fit your flue rather than substituting whatever is on the shelf. Turnaround depends on the part, and we’ll tell you what to expect when we quote the job. You can read more about our brands and how we specify them.
Pricing for Chimney Company in Newport, RI
| Service | Typical range in Newport |
|---|---|
| Chimney sweep (standard) | $150 – $300 |
| Fireplace inspection | $125 – $275 |
| Chimney flue inspection | $150 – $350 |
| Level 2 chimney inspection | $200 – $450 |
| Chimney cap installation | $200 – $500 |
| Crown repair | $300 – $800 |
| Chimney relining | $1,800 – $4,500 |
| HeatShield liner resurfacing | $1,200 – $3,000 |
| Masonry repair | $500 – $2,500 |
What pushes price up in Newport is usually access and condition: multi-flue chimneys in the Point and Historic Hill take longer, and original unlined flues often reveal parging and mortar work once the camera goes in. Every figure above is typical, not final – the written estimate you get before any work starts is the price.
See the difference
Before
After
Before
After
Before
AfterNeighborhoods We Serve in Newport
We work across Newport, from the dense historic blocks to the quieter streets at the city’s edges. Chimney work here often means older flues, salt-damaged crowns, and fireplaces that haven’t been examined in years. We book jobs by location and access, and response across the city is consistent.
- Point
- Historic Hill
- Bellevue Avenue area
- Fifth Ward
- Ocean Drive
Service Area – Cities Near Newport
Newport sits close to several communities with similar coastal conditions, and we cover them as part of the same schedule. If you’re just outside the city line, we can usually fold your job into the same route: Newport East, RI, Kingston, RI, Tiverton, RI, and Warwick, RI. Salt air and older housing stock follow the shoreline in all of them, so the inspection-first approach applies the same way.
Serving Newport, RI – Our Local Coverage Area
We serve Newport and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Newport
Yes. We work throughout Newport, including the Point, Historic Hill, the Fifth Ward, and the Bellevue Avenue area. Access can affect scheduling in dense historic blocks, so mention any parking or alley constraints when you call.
Relining and structural masonry work often require a permit, and rules vary by jurisdiction, so check with Newport’s building department before work starts. We’ll tell you what the scope involves so you can ask the right questions.
Call (833) 315-2861 and we’ll book you in. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
Contact
Whether you’re in the Point with an unlined flue or out toward Ocean Drive with a crown that’s spalling, the first step is the same: a camera inspection with evidence you can see and a written estimate that sets the price. We handle the sweep, the inspection, and the repair ourselves, using contractor-grade materials from brands professionals trust, and we’ll tell you when work can safely wait. Our technicians have up to 12 years of experience. Call (833) 315-2861 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Newport Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Doug Miller"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Chris Padgett"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Bethany Hoffman